In 1915 the furniture designed by Kaare Klint for the Faaborg Museum on Funen - along with drawings and even a section of tiled floor for the main gallery - were exhibited in Copenhagen in the Danish Museum of Art & Design that was then still in its original building on City Hall Square.
Clearly this was good marketing for Klint then went on to design a number of chairs of the Faaborg type for a number of important and influential clients in Copenhagen.
The original Faaborg Chair from 1914 has cane in the panels of the back and there was a rather heavier looking version of that chair, with solid panels in the back rest with a top rail that flares out in a more marked way, that was made by the cabinetmaker N M Rasmussen in 1916 for Aage Lunn and then in 1917 a version of the chair in Cuban mahogany was made for Dansk Kunsthandel in Copenhagen by N C Jensen Kjær.
This chair is much heavier and more robust than the chair for the Faaborg Museum with deeper pieces for the frame of the seat and the back rest has a much more pronounced outward curve to the lip or top rail. As with the Faaborg Chair, the front legs are tapered but vertical and the back legs are set at 45 degrees to the curve of the seat and back and are not just tapered but are also curved or flared outwards following the form of a Klismos chair.
All round, this is a much more robust chair. There is a third rail around the back above the cane seat but below the top of the cushion and the upper part of the leg does not cut in or reduce until it is above this point … in part meaning that the tenons of the rail are housed into mortices in the thickest part of the leg but also to link visually the cushion and the seat rail and create a series of closely related curved lines from the top rail down.
Another variation of the Faaborg Chair, with a fixed leather seat, was produced in the 1930s.
designed by Kaare Klint (1888-1954)
made by N C Jensen Kjær
Cuban mahogany, cane seat and leather cushion
height of seat: 46cm